wrtu54g-tm:bootlog
This is an old revision of the document!
(v0.73.00) U-Boot 2.1.4 (Nov 6 2007 - 12:47:31)
DRAM: 64 MB
Flash: 8 MB
In: serial
Out: serial
Err: serial
Net: adm8668_net
Hit any key to stop autoboot: 1 0
## Booting image at b0040000 ...
Check vendor string... Image Name: ADM8668 Linux Kernel(2.4.31)
Created: 2009-04-05 4:23:48 UTC
Image Type: MIPS Linux Kernel Image (gzip compressed)
Data Size: 5685184 Bytes = 5.4 MB
Load Address: 00002000
Entry Point: 801ee040
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
LINUX/8668 started...
CPU revision is: 0001800b
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.31-ADM8668 (sjp@ubuntu-dev) (gcc version 3.3.6) #1.00.15.GPL-01 00:20:41 EDT 04/05/2009
Can't analyze prologue code at 8001f824
adm8668_setup() starts.
System has PCI BIOS
Determined physical RAM map:
memory: 03dc1000 @ 0023f000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: rootfstype=squashfs root=/dev/mtdblock1 console=/dev/ttyS0
CPU clock: 200 MHz
Using 100.000 MHz high precision timer.
Syam before calibrate_delay
Calibrating delay loop...
199.47 BogoMIPS
Syam after calibrate_delay
MIPS CPU counter frequency is fixed at 100000000 Hz
Memory: 62524k/63236k available (1953k kernel code, 712k reserved, 108k data, 104k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
The GAN WDT version is 0.0.1 The Built TIME is 00:23:10
Autoconfig PCI channel 0x80224458
Scanning bus 00, I/O 0x12600000:0x12800000, Mem 0x16000000:0x1e000000
00:00.0 Class 0600: 1317:8688
Mem unavailable -- skipping
I/O at 0x12600000 [size=0x100000]
00:01.0 Class 0280: 1814:0301
Mem at 0x16000000 [size=0x8000]
ADM8668 PCI FIXUP
PCI_BIOS_FIXUP
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
pty: 256 Unix98 ptys configured
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
NOR flash vendor: 0xc2 device: 0x22cb
Backup segment is working!
ADM8668 proc initialization okay!
adm1: Infineon-ADMtek onchip network rev 0 at 0x11600000, 00:00:00:00:00:00, IRQ 8.
adm0: Infineon-ADMtek onchip network rev 0 at 0x11a00000, 00:00:00:FF:FF:FF, IRQ 7.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb_hcd_arc_probe : ehci_hcd
USB Base Address: b1200100<6>usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 1 port detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 600 bytes per conntrack
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
ADM8668 NOR flash device: 800000 at 10000000
ADM8668 NOR flash device: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 2 MTD partitions on "ADM8668 NOR flash device":
0x00030000-0x001b0000 : "Kernel Image"
0x00200000-0x00600000 : "LZMA Image"
ADM8668 NOR flash device initialized
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 104k freed
init started: BusyBox v1.00 (2008.12.05-20:35+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
Starting RAWACCESS device driver...
Using /lib/modules/ifx_raw_acs
hub.c: new USB device ehci_hcd-1, assigned address 2
(raw_acs)Init raw_acs successfully!
Vendor: 0xc2 Device: 0x22cb Flash size: 800000
usb.c: USB device 2 (vend/prod 0x8e6/0x3480) is not claimed by any active driver.
rawdev opened!
(raw_acs)flash_read (b0020000)
Read RAW_INFO...
Read 9282 bytes from flash (fd: 3)
7826 bytes...Uncompressed to...36010 bytes
Write 12955 bytes to /nv/rc.conf
Write 4208 bytes to /nv/ccmapper.conf
Write 203 bytes to /nv/prd_config.txt
Write 414 bytes to /nv/rc.static
Write 960 bytes to /nv/11e_info
Write 14582 bytes to /nv/rc.filter
Write 1219 bytes to /nv/RT61AP.dat
Write 1469 bytes to /nv/rc.wlanmac
Read data completely!
rawdev opened!
Set raw access addr: 201f0000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
(raw_acs)Raw Access Addr: 201f0000
rawdev opened!
(raw_acs)flash_read (b05f0000)
Read RAW_INFO...
Read 6003 bytes from flash (fd: 3)
Data Not Compressed!
Write 4547 bytes to /tmp/crt.pem
Read data completely!
rawdev opened!
Set raw access addr: 1fc20000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
(raw_acs)Raw Access Addr: 1fc20000
Starting GAN-VINETIC Board driver...
Using ./BSP_GAN_driver
Warning: loading BSP_GAN_driver will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Vinetic Board Driver(Included SPI driver) Version : 1.0.0
Starting VINETIC device driver...
Using ./drv_vinetic
Warning: loading drv_vinetic will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
VINETIC device driver, version 1.1.17.3
<6>(c) Copyright 2006, Infineon Technologies AG
Using /lib/modules/swmod.o
Loading ADM6996 driver...
Kernel module version: v1.0 Driver version: v2.0beta3 Date code: 2008-11-20
Setting default ADM6996 registers...
ADM6996 proc initialization okay!
Set queue 1 to priority 2
Set queue 2 to priority 4
Set queue 3 to priority 8
Version: CCMAPPER_LIGHT_V1.00
<7>WARN: No ring configuration in BBD => default ring config is programmed
<7>WARN: No dc threshold configuration in BBD => default threshold configuration is programmed
Sherlock Debug nEdspVers != 0x0200
Using /usr/nas/klinux.o
Warning: loading klinux will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/sio_ring.o
Warning: loading sio_ring will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lchan.o
Warning: loading io_lchan will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lphone.o
Warning: loading io_lphone will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lapp.o
Warning: loading io_lapp will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/kbutton.o
Loading ADM8668 kbutton driver: Version 1.02
TMO Pairing Version : 1.0.3
Using /lib/modules/ip_conntrack_proto_gre.o
Using /lib/modules/ip_conntrack_pptp.o
ip_conntrack_pptp version 1.9 loaded
Using /lib/modules/ip_nat_proto_gre.o
Using /lib/modules/ip_nat_pptp.o
ip_nat_pptp version 1.5 loaded
Initialize Ralink Wlan ...
Setting Pairing LED to : OFF
SIOCGIFFLAGS: No such device
SIOCSIFADDR: No such device
SIOCGIFFLAGS: No such device
ra0 no private ioctls.
Ralink Wlan is ready.
device adm0 entered promiscuous mode
interface ra0 does not exist!
adm0: Promiscuous mode enabled.
adm0: Promiscuous mode enabled.
adm0: Promiscuous mode enabled.
br0: port 1(adm0) entering learning state
Killall luma applications...
ra0 no private ioctls.
Run luma applicaitons...
LUMA Agent starting...
LUMA LogP starting...
Starting DHCP Client ....
udhcpc (v0.9.9-pre) started
Sending discover...
Sending select for 10.168.1.102...
Lease of 10.168.1.102 obtained, lease time 172800
deleting routers
route: SIOC[ADD|DEL]RT: No such process
adding dns 10.168.1.100
Mon Sep 1 12:00:00 UTC 2008
br0: port 1(adm0) entering forwarding state
br0: topology change detected, propagating
clock.via.net: Unknown host
time.windows.com: Unknown host
[LOGP]Parsing LOGs ...
[LOGP]Parsing LOGs ... Done.
urlstr === https://uma-rms.t-mobile.com:443/IN parse_scheme .... i===5temp_host_name === uma-rms.t-mobile.com
[LAMSG]Msg sent successfully.
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
Disable IGMP proxy function
Using /lib/modules/turbo_nat.o
Warning: loading turbo_nat will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
TurboNat Module loaded: Version 1.03-qos2-test Built Time 14:11:19
udhcpd (v0.9.9-pre) started
Unable to open /var/lib/misc/udhcpd.leases for reading
rawdev opened!
(WRITE) addr: 0200, value: b100
(WRITE) addr: 0220, value: b100
(WRITE) addr: 0240, value: b100
(WRITE) addr: 0260, value: b100
WAN-Detection Version : 1.1.0
Setting Phone1 LED to : OFF
Setting Phone2 LED to : OFF
Notice: can't open file: /etc/hosts
Setting Hostname: .
NV Daemon Version : 1.1.0
rawdev opened!
/nv/rc.wlanmac: 1469 bytes
/nv/RT61AP.dat: 1219 bytes
/nv/rc.filter: 14582 bytes
/nv/11e_info: 960 bytes
/nv/rc.static: 414 bytes
/nv/prd_config.txt: 203 bytes
/nv/ccmapper.conf: 4208 bytes
/nv/rc.conf: 12955 bytes
(raw_acs)ioctl: RAWDRV_IOCRSRAWACS
(raw_acs)Raw Access Addr: 1fc20000
Files: 8
Got 1469 bytes from /nv/rc.wlanmac
Got 1219 bytes from /nv/RT61AP.dat
Got 14582 bytes from /nv/rc.filter
Got 960 bytes from /nv/11e_info
Got 414 bytes from /nv/rc.static
Got 203 bytes from /nv/prd_config.txt
Got 4208 bytes from /nv/ccmapper.conf
Got 12955 bytes from /nv/rc.conf
36010 bytes...Compressed to...7832 bytes
Copy 1456 bytes to buffer
(raw_acs)Write 9288
Write 9288 bytes to rawdev!
Store /nv/* to flash completely!
Daemon Successfully forked (pid: 741)
Please press Enter to activate this console.
wrtu54g-tm/bootlog.1265418378.txt.gz ยท Last modified: 2023/11/04 22:29 (external edit)