Differences

This shows you the differences between two versions of the page.

--- wrtu54g-tm:changelog-next [2011/01/18 09:44] – neutronscott
+++ wrtu54g-tm:changelog-next [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== OpenWRT devel build 4 =====
-  * Started with a fresh checkout of openwrt trunk r24978.
-  * Hopefully fixed wifi issues. Helmut Schaa made the patches against git-tree, I applied them manually to the compat-wireless in trunk.
-  * Ported my MTD map from backfire: the kernel+rootfs image is split on first boot to speedup future boots. (Tho the LZMA loader seems slower than I remember, or have I just been away so long I forgot?)
-====== OpenWRT devel build 3 =====
-  * Upgraded to Linux 2.6.36!
-  * LZMA loader totally faster. RAM->RAM expansion now, the super slow lzma read() callback for FLASH is gone (thus can boot it with TFTP/serial)! Also passes boot arguments to kernel.
-  * kernel reads cmdline from bootloader. Also memory size.
-  * Re-worked ethernet driver to use platform_device instead of pci_device. Now the source is very small and customized to our chip, and I will eventually have an easier time adding switch/phy driver. (maybe performance improvement too since less code...)
-====== OpenWRT devel build 2 =====
-  * Fixed same bug I originally had in backfire's NOR map. Squashfs detection. Virgin routers found the recovery squashfs, and that squashed the partition table :(
-  * Disabled Wifi LEDs to see if it improved performance :(
-====== OpenWRT devel build 1 =====
-  * Initial release based on kernel 2.6.35.7.