User Tools

Site Tools


wrtu54g-tm:firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
wrtu54g-tm:firmware [2010/09/18 14:26] neutronscottwrtu54g-tm:firmware [2023/11/04 22:30] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== OpenWRT Backfire (10.03r23044)  ======+====== PrefaceWarnings, don't try this at home ======
  
-Basic openwrt buildUse opkg.conf from below and **opkg update** then **opkg install kmod-rt61ap** i'm done k tks bye:P+There is a problem that I have no one with serial console to assist with testing these firmwares before I post themThus, it is all at your **risk**. I do limited tested beforehand.
  
-binary: **direct link removed. more testing needed.. proceed with caution and attempt only if you have serial console access ** [[http://wrt.scottn.us/|http://wrt.scottn.us/]] +I have looked at our bootloader, and it has no method to attempt a failsafe TFTP flash as Broadcom's does. The WRT54G I believe will load a TFTP image from bootloader if kernel is broke without interventionOur current bootloader will notIf you attempt to start a TFTP transfer, it will try again and again and again indefinitely, thus it will never start the flashed imageI am trying to find solution to this, and the best I can think of now is replacing the bootloaderThis is tricky as well and may produce a real brick requiring a JTAG which I don't have! :(
- +
-source: [[http://wrt.scottn.us/openwrt-backfire-adm8668-r1.tar.gz|http://wrt.scottn.us/openwrt-backfire-adm8668-r1.tar.gz]] +
- +
- +
-=== opkg === +
- +
-opkg.conf to include any packages i have made available [wifi driversduh] +
- +
-  src/gz packages http://downloads.openwrt.org/backfire/10.03/brcm-2.4/packages +
-  src adm8668 http://wrt.scottn.us/ipkg +
-  dest root / +
-  dest ram /tmp +
-  lists_dir ext /var/opkg-lists +
-  option overlay_root /overlay +
-  arch all 1 +
-  arch any 5 +
-  arch adm8668 10 +
-  arch brcm-2.4 20 +
-  arch mipsel 30 +
- +
- +
-===== Building it ===== +
- +
-  $ svn co -r 23044 svn://svn.openwrt.org/openwrt/branches/backfire +
-  $ cd backfire +
-  $ wget http://wrt.scottn.us/openwrt-backfire-adm8668-r1.tar.gz +
-  $ tar vfxz openwrt-backfire-adm8668-r1.tar.gz +
-  $ rm target/linux/generic-2.4/patches/100-wireless-extension.patch  +
-  $ make menuconfig +
-   +
-  Here you select 'adm8668' and that should be all that's required. +
-   +
-  $ make +
-   +
-  Take a nap.+
  
 ====== neutronscott tight  ====== ====== neutronscott tight  ======
Line 121: Line 86:
  
 ===== Download ===== ===== Download =====
 +**Think first: you probably don't want this!!** try [[wrtu54g-tm:openwrt|OpenWRT builds]].
 +
 [[http://wrt.scottn.us/wrtu54g-tm_tight_20100912.bin|wrtu54g-tm_tight_20100912.bin]] (12/sept/2010) [[http://wrt.scottn.us/wrtu54g-tm_tight_20100912.bin|wrtu54g-tm_tight_20100912.bin]] (12/sept/2010)
  
wrtu54g-tm/firmware.1284820007.txt.gz · Last modified: 2023/11/04 22:29 (external edit)

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki