Differences

This shows you the differences between two versions of the page.

--- wrtu54g-tm [2011/04/07 00:44] – neutronscott
+++ wrtu54g-tm [2023/11/04 22:30] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Introduction ======
+====== WRTU54G-TM OpenWRT ======
 Someone had to be brave enough to take on the creation of a 3rd party firmware for this thing. I'm Scott Nicholas, aka neutronscott. This wiki describes my work of porting Linksys' GPL sources to a modern Linux kernel, and subsequently plugging that into the OpenWRT system.
 ====== Current Status ======
-Latest binary is contributed by Alexander H. on April 4th, 2011 and is from OpenWRT trunk r26444.
+: Official build seems available: http://downloads.openwrt.org/attitude_adjustment/12.09-rc2/adm8668/generic/
+April 7th, 2011: Created a snapshot directory -- http://wrt.scottn.us/snapshots/
 FIXME (insert the hardware device table showing progress again..)
@@ Line 13: / Line 15: @@
 ====== Downloads ======
+  * Official 12.09-rc2: http://downloads.openwrt.org/attitude_adjustment/12.09-rc2/adm8668/generic/
+Everything below here is ancient.
+  * Snapshots at http://wrt.scottn.us/snapshots/
   * Alex's r26444 build includes ipv6, radvd, and luci: http://wrt.scottn.us/wrtu54g-tm-r26444.bin
   * @jdownj/twitter contributed this build which includes OpenVPN: http://wrt.scottn.us/wrtu54g-tm-jdownj-openvpn.bin
@@ Line 27: / Line 34: @@
 ===== From previous release =====
-I recall keeping configuration not working before. Do so at your own risk! If you have the old backfire build maybe try [[wrtu54g-tm:openwrt#upgrade_from_backfire|this]] or you need to edit /lib/upgrade/platform.sh and use PART_NAME=linux:rootfs:rootfs_data since things were partitioned differently then.
+I recall keeping configuration not working before. Do so at your own risk! If you have the backfire b1 or b2 try [[wrtu54g-tm:openwrt#upgrade_from_backfire|this]] or you need to edit /lib/upgrade/platform.sh and use PART_NAME=linux:rootfs:rootfs_data since things were partitioned differently then.
   root@OpenWrt:~# cd /tmp
@@ Line 73: / Line 80: @@
 If you require functionality that is not included in a basic build (i.e. IPv6 or PPPoE), then you may have to build it yourself. This is because I don't have a full package repository yet.
-====== Support ======
-There is a mailing list available at http://lists.scottn.us/cgi-bin/mailman/listinfo/adm8668 \\
-You can contact me personally by methods described [[contact|here]]. \\
-I'll try to help out where I can, but honestly the active development pretty much ended after the patch was sent off for inclusion into OpenWRT. Other users have been assisting each other as well with questions and builds. Thanks everyone! :)
 It's not too complicated.
@@ Line 88: / Line 88: @@
   * Issue **make** and take a nap.
-I tried building the entire thing, and it didn't workout. We really need the OpenWRT guys to include our platform in their buildbot snapshots. :(
+I tried building _all_ of the packages feed, and it didn't workout. We really need the OpenWRT guys to include our platform in their buildbot snapshots. :(
+====== Removal ======
+Simply follow the [[wrtu54g-tm#from_previous_release|installation instructions]] but download and install http://wrt.scottn.us/revert.bin
+I can't make these things more simple! ;)
+====== Support ======
+You can contact me personally by methods described [[contact|here]]. \\
+I'll try to help out where I can, but honestly the active development pretty much ended after the patch was sent off for inclusion into OpenWRT.
 ====== Thanks ======