Differences

This shows you the differences between two versions of the page.

--- wrtu54g-tm:bootlog [2010/02/06 01:06] – external edit 127.0.0.1
+++ wrtu54g-tm:bootlog [2011/04/07 00:54] (current) – removed neutronscott
@@ Line 1: / Line 1: @@
-<code>
-(v0.73.00) U-Boot 2.1.4 (Nov  6 2007 - 12:47:31)
-DRAM:  64 MB
-Flash:  8 MB
-In:    serial
-Out:   serial
-Err:   serial
-Net:   adm8668_net
-Hit any key to stop autoboot:  1  0
-## Booting image at b0040000 ...
-Check vendor string...    Image Name:   ADM8668 Linux Kernel(2.4.31)
-   Created:      2009-04-05   4:23:48 UTC
-   Image Type:   MIPS Linux Kernel Image (gzip compressed)
-   Data Size:    5685184 Bytes =  5.4 MB
-   Load Address: 00002000
-   Entry Point:  801ee040
-   Verifying Checksum ... OK
-   Uncompressing Kernel Image ... OK
-Starting kernel ...
-LINUX/8668 started...
-CPU revision is: 0001800b
-Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
-Primary data cache 8kB, 2-way, linesize 16 bytes.
-Linux version 2.4.31-ADM8668 (sjp@ubuntu-dev) (gcc version 3.3.6) #1.00.15.GPL-01 00:20:41 EDT 04/05/2009
-Can't analyze prologue code at 8001f824
-adm8668_setup() starts.
-System has PCI BIOS
-Determined physical RAM map:
- memory: 03dc1000 @ 0023f000 (usable)
-On node 0 totalpages: 16384
-zone(0): 16384 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: rootfstype=squashfs root=/dev/mtdblock1 console=/dev/ttyS0
-CPU clock: 200 MHz
-Using 100.000 MHz high precision timer.
-Syam before calibrate_delay
-Calibrating delay loop...
-.47 BogoMIPS
-Syam after calibrate_delay
-MIPS CPU counter frequency is fixed at 100000000 Hz
-Memory: 62524k/63236k available (1953k kernel code, 712k reserved, 108k data, 104k init, 0k highmem)
-Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
-Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
-Mount cache hash table entries: 512 (order: 0, 4096 bytes)
-Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
-Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
-Checking for 'wait' instruction...  available.
-POSIX conformance testing by UNIFIX
-The GAN WDT version is 0.0.1 The Built TIME is 00:23:10
-Autoconfig PCI channel 0x80224458
-Scanning bus 00, I/O 0x12600000:0x12800000, Mem 0x16000000:0x1e000000
-:00.0 Class 0600: 1317:8688
-        Mem unavailable -- skipping
-        I/O at 0x12600000 [size=0x100000]
-:01.0 Class 0280: 1814:0301
-        Mem at 0x16000000 [size=0x8000]
-ADM8668 PCI FIXUP
-PCI_BIOS_FIXUP
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
-pty: 256 Unix98 ptys configured
-HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
-N_HDLC line discipline registered.
-NOR flash vendor: 0xc2 device: 0x22cb
-Backup segment is working!
-ADM8668 proc initialization okay!
-adm1: Infineon-ADMtek onchip network rev 0 at 0x11600000, 00:00:00:00:00:00, IRQ 8.
-adm0: Infineon-ADMtek onchip network rev 0 at 0x11a00000, 00:00:00:FF:FF:FF, IRQ 7.
-SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
-RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
-loop: loaded (max 8 devices)
-PPP generic driver version 2.4.2
-PPP Deflate Compression module registered
-PPP BSD Compression module registered
-SCSI subsystem driver Revision: 1.00
-kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
-usb.c: registered new driver usbdevfs
-usb.c: registered new driver hub
- usb_hcd_arc_probe :  ehci_hcd
- USB Base Address: b1200100<6>usb.c: new USB bus registered, assigned bus number 1
-hub.c: USB hub found
-hub.c: 1 port detected
-Initializing USB Mass Storage driver...
-usb.c: registered new driver usb-storage
-USB Mass Storage support registered.
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 512 buckets, 4Kbytes
-TCP: Hash tables configured (established 4096 bind 8192)
-Linux IP multicast router 0.06 plus PIM-SM
-ip_conntrack version 2.1 (512 buckets, 4096 max) - 600 bytes per conntrack
-ip_conntrack_rtsp v0.01 loading
-ip_nat_rtsp v0.01 loading
-ip_tables: (C) 2000-2002 Netfilter core team
-ipt_time loading
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-NET4: Ethernet Bridge 008 for NET4.0
-ADM8668 NOR flash device: 800000 at 10000000
-ADM8668 NOR flash device: Found 1 x16 devices at 0x0 in 16-bit bank
- Amd/Fujitsu Extended Query Table at 0x0040
-number of CFI chips: 1
-cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
-Creating 2 MTD partitions on "ADM8668 NOR flash device":
-x00030000-0x001b0000 : "Kernel Image"
-x00200000-0x00600000 : "LZMA Image"
-ADM8668 NOR flash device initialized
-VFS: Mounted root (squashfs filesystem) readonly.
-Freeing prom memory: 0kb freed
-Freeing unused kernel memory: 104k freed
-init started:  BusyBox v1.00 (2008.12.05-20:35+0000) multi-call binary
-Algorithmics/MIPS FPU Emulator v1.5
-Starting RAWACCESS device driver...
-Using /lib/modules/ifx_raw_acs
-hub.c: new USB device ehci_hcd-1, assigned address 2
-(raw_acs)Init raw_acs successfully!
-Vendor: 0xc2 Device: 0x22cb Flash size: 800000
-usb.c: USB device 2 (vend/prod 0x8e6/0x3480) is not claimed by any active driver.
-rawdev opened!
-(raw_acs)flash_read (b0020000)
-Read RAW_INFO...
-Read 9282 bytes from flash (fd: 3)
-bytes...Uncompressed to...36010 bytes
-Write 12955 bytes to /nv/rc.conf
-Write 4208 bytes to /nv/ccmapper.conf
-Write 203 bytes to /nv/prd_config.txt
-Write 414 bytes to /nv/rc.static
-Write 960 bytes to /nv/11e_info
-Write 14582 bytes to /nv/rc.filter
-Write 1219 bytes to /nv/RT61AP.dat
-Write 1469 bytes to /nv/rc.wlanmac
-Read data completely!
-rawdev opened!
-Set raw access addr: 201f0000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
-(raw_acs)Raw Access Addr: 201f0000
-rawdev opened!
-(raw_acs)flash_read (b05f0000)
-Read RAW_INFO...
-Read 6003 bytes from flash (fd: 3)
-Data Not Compressed!
-Write 4547 bytes to /tmp/crt.pem
-Read data completely!
-rawdev opened!
-Set raw access addr: 1fc20000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
-(raw_acs)Raw Access Addr: 1fc20000
-Starting GAN-VINETIC Board driver...
-Using ./BSP_GAN_driver
-Warning: loading BSP_GAN_driver will taint the kernel: no license
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-Vinetic Board Driver(Included SPI driver) Version : 1.0.0
-Starting VINETIC device driver...
-Using ./drv_vinetic
-Warning: loading drv_vinetic will taint the kernel: no license
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-VINETIC device driver, version 1.1.17.3
-<6>(c) Copyright 2006, Infineon Technologies AG
-Using /lib/modules/swmod.o
-Loading ADM6996 driver...
-Kernel module version: v1.0 Driver version: v2.0beta3 Date code: 2008-11-20
-Setting default ADM6996 registers...
-ADM6996 proc initialization okay!
-Set queue 1 to priority 2
-Set queue 2 to priority 4
-Set queue 3 to priority 8
-Version: CCMAPPER_LIGHT_V1.00
-<7>WARN:  No ring configuration in BBD => default ring config is programmed
-<7>WARN:  No dc threshold configuration in BBD => default threshold configuration is programmed
-Sherlock Debug nEdspVers != 0x0200
-Using /usr/nas/klinux.o
-Warning: loading klinux will taint the kernel: no license
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-Using /usr/nas/sio_ring.o
-Warning: loading sio_ring will taint the kernel: no license
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-Using /usr/nas/io_lchan.o
-Warning: loading io_lchan will taint the kernel: no license
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-Using /usr/nas/io_lphone.o
-Warning: loading io_lphone will taint the kernel: no license
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-Using /usr/nas/io_lapp.o
-Warning: loading io_lapp will taint the kernel: no license
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-Using /lib/modules/kbutton.o
-Loading ADM8668 kbutton driver: Version 1.02
-TMO Pairing Version : 1.0.3
-Using /lib/modules/ip_conntrack_proto_gre.o
-Using /lib/modules/ip_conntrack_pptp.o
-ip_conntrack_pptp version 1.9 loaded
-Using /lib/modules/ip_nat_proto_gre.o
-Using /lib/modules/ip_nat_pptp.o
-ip_nat_pptp version 1.5 loaded
-Initialize Ralink Wlan ...
-Setting Pairing LED to : OFF
-SIOCGIFFLAGS: No such device
-SIOCSIFADDR: No such device
-SIOCGIFFLAGS: No such device
-ra0       no private ioctls.
-Ralink Wlan is ready.
-device adm0 entered promiscuous mode
-interface ra0 does not exist!
-adm0: Promiscuous mode enabled.
-adm0: Promiscuous mode enabled.
-adm0: Promiscuous mode enabled.
-br0: port 1(adm0) entering learning state
-Killall luma applications...
-ra0       no private ioctls.
-Run luma applicaitons...
-LUMA Agent starting...
-LUMA LogP starting...
-Starting DHCP Client ....
-udhcpc (v0.9.9-pre) started
-Sending discover...
-Sending select for 10.168.1.102...
-Lease of 10.168.1.102 obtained, lease time 172800
-deleting routers
-route: SIOC[ADD|DEL]RT: No such process
-adding dns 10.168.1.100
-Mon Sep  1 12:00:00 UTC 2008
-br0: port 1(adm0) entering forwarding state
-br0: topology change detected, propagating
-clock.via.net: Unknown host
-time.windows.com: Unknown host
-[LOGP]Parsing LOGs ...
-[LOGP]Parsing LOGs ... Done.
-urlstr === https://uma-rms.t-mobile.com:443/IN parse_scheme .... i===5temp_host_name === uma-rms.t-mobile.com
-[LAMSG]Msg sent successfully.
-iptables: No chain/target/match by that name
-iptables: No chain/target/match by that name
-Disable IGMP proxy function
-Using /lib/modules/turbo_nat.o
-Warning: loading turbo_nat will taint the kernel: non-GPL license - Proprietary
-  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
-TurboNat Module loaded: Version 1.03-qos2-test Built Time 14:11:19
-udhcpd (v0.9.9-pre) started
-Unable to open /var/lib/misc/udhcpd.leases for reading
-rawdev opened!
-(WRITE) addr: 0200, value: b100
-(WRITE) addr: 0220, value: b100
-(WRITE) addr: 0240, value: b100
-(WRITE) addr: 0260, value: b100
-WAN-Detection Version : 1.1.0
-Setting Phone1 LED to : OFF
-Setting Phone2 LED to : OFF
-Notice: can't open file: /etc/hosts
-Setting Hostname: .
-NV Daemon Version : 1.1.0
-rawdev opened!
-/nv/rc.wlanmac: 1469 bytes
-/nv/RT61AP.dat: 1219 bytes
-/nv/rc.filter: 14582 bytes
-/nv/11e_info: 960 bytes
-/nv/rc.static: 414 bytes
-/nv/prd_config.txt: 203 bytes
-/nv/ccmapper.conf: 4208 bytes
-/nv/rc.conf: 12955 bytes
-(raw_acs)ioctl: RAWDRV_IOCRSRAWACS
-(raw_acs)Raw Access Addr: 1fc20000
-Files: 8
-Got 1469 bytes from /nv/rc.wlanmac
-Got 1219 bytes from /nv/RT61AP.dat
-Got 14582 bytes from /nv/rc.filter
-Got 960 bytes from /nv/11e_info
-Got 414 bytes from /nv/rc.static
-Got 203 bytes from /nv/prd_config.txt
-Got 4208 bytes from /nv/ccmapper.conf
-Got 12955 bytes from /nv/rc.conf
-bytes...Compressed to...7832 bytes
-Copy 1456 bytes to buffer
-(raw_acs)Write 9288
-Write 9288 bytes to rawdev!
-Store /nv/* to flash completely!
-Daemon Successfully forked (pid: 741)
-Please press Enter to activate this console.
-</code>