Differences

This shows you the differences between two versions of the page.

--- wrtu54g-tm:download [2010/09/05 06:19] – neutronscott
+++ wrtu54g-tm:download [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Download firmware images ======
-===== Linux 2.4 based images  =====
-code name "[[http://scottn.us/downloads/wrtu54g-tm_neutronscott_naked.bin|neutronscott naked]]" - lean busybox system for client mode.
-simple busybox with a few tools sprinked in. creates a 2MB jffs2 writable partition, overlays it ontop of the read-only partition, and you can change any file! i suggest you change root's password, it is "password"
-i tried to incorporate a failsafe in case you mess up your configuration and no longer can access the box, and don't have a serial cable. this is the best i came up with:
-plug laptop into WAN(internet) port of router. set IP of PC to 10.3.0.2, run "nc -l 666" or anything that'll listen on port 666. now turn on the router. the router will ping 10.3.0.2:666 and then runs dropbear, on 10.3.0.1 -- without the jffs overlay so the password will be "password" again. hope this helps. :)
-===== Linux 2.6 based images (WIP! EXPERIMENTAL!) =====
-===== Official GPL source based images =====
-===== Official binary based images =====